| 1. Make two lists of Wood.Each 500mm long | | | | better to go slowly then to end up having the |
| | | | hole piece renderd useless due to beeing in a |
| 45mm wide | | | | hurry.5. Re-checkThe last and most important |
| | | | step is to re-check. Repeat step 3-5 until |
| 25mm thick.The lists needs to be completely | | | | you are completely satisfied.When it is |
| straight and even. Make sure they are witout | | | | straight mark the side so you know that side |
| twigs in the material. | | | | is straight turn the piece and do the hole |
| | | | process on the other side.PS. If you truly |
| These lists of wood may become one of your | | | | want to build great furniture check out: |
| most important tools in your workshop.2. | | | | Kjellhov is the publisher of numerous books |
| Position the listsLay the lists opposite of | | | | for woodworkers and handy-men. Such as "How |
| the direction of the wood in your piece. One | | | | to build Classic Furniture", "woodfinishing", |
| at each end. This will provide you with two | | | | "Hints and Tips for the Handyman", and "The |
| reference points.3. MeasureTake a couple of | | | | New Manual for Model Ship Building". For |
| steps back and aim. The two lists should | | | | furniture builders we recomend " How to Build |
| appear parallel, if they do then the piece is | | | | Classic Furniture" it is a must read => is a |
| straight. Congratulations! This is what you | | | | "Shareware" Article |
| want. Unfortunately that is not always the | | | | |
| case - If it`s not straight move on to step | | | | (what's that? read on...)This article is |
| 4.4. Mark itIf the wood is not straight take | | | | shareware. Give this article away for free |
| a pencile and mark where the wood is | | | | on your site, or include it as part of any |
| elevated. Then scrubb down. An important note | | | | paid package as long as the entire article is |
| though, do not remvoe too much at a time. | | | | left intact including this notice. |