Only the Best - Teragren Bamboo Flooring

Teragren is a bamboo flooring distributor that doesTeragren bamboo floors for LEED credits.
much more than distribute flooring, they alsoFinish First
manufacture it and offer the best customer serviceTeragren realizes that the finish on a floor is its first
in the market. Simply put, Teragren starts in theline of protection against scratching, denting, marring
bamboo fields and follows their product through toand other damages. That is why all Teragren bamboo
the customer’s installation.floors have a 7-Layer German Finish.
The Bamboo FieldIn keeping with being environmentally friendly, this
Teragren’s quality control processes don’tfinish is water-based and solvent free, a product
start during the manufacturing of their bamboocreated by the Klump Coatings of Germany. This
flooring. They go all the way to the beginning of theprocess of using seven layers of finish create a
process to the bamboo field.finished product that is not only durable but also easy
In order to insure that Teragren bamboo flooringsto refinish when necessary, though with a 25-year
are consistently strong and durable, they use onlywarranty it is doubtful that refinishing will be
bamboo that they have designated as Optimum 5.5necessary.
Moso. This species of bamboo is known for its 
durability and strength due to the density of itsMoisturizing
fibers.Bamboo is naturally a moisture resistant floor
Optimum 5.5 Moso grows in the Zhejiang and Jianxihowever; the main key to preventing moisture issues
provinces of China where it is not harvested until itsuch as warping is to acclimate the wood planks
reaches maturity, approximately 5-6 years old. Thisbefore they are installed. Teragren products are
insistence on consistency and durability in the bamboodesigned and produced to arrive on the job site with
assures a consistency in the durability of Teragrensix to nine percent moisture content.
bamboo floors.Teragren takes extra steps in their manufacturing
The Manufacturing Processprocess to insure that their floor is stable and ready
From the culling, cooking and caramelizing, each stepto be acclimated on the job site.
of the process in manufacturing Teragren bambooAll slats are kiln dried before the final laminations
for their floors is carefully planned not only toprocess and then stored in a humidity controlled
produce the best possible product in terms ofstorage area for at least two weeks before the
durability but to also be environmentally aware duringmilling process.
the processes.The final step is up to the installer, Teragren flooring
This includes steps such as using the shavings fromshould be allowed to acclimate to the room it will be
planning the stalks to fire the kilns to usingstored in for twenty-four hours before installation.
environmentally friendly adhesives; Teragren seeks toTeragren bamboo floors are not just the best choice
add to the natural ‘green’ aspect of usingin bamboo flooring but they should be the only choice
bamboo. These steps have made Teregren floors afor bamboo flooring if the floor is going to be long
LEED certified product, qualifying homes built withlasting and durable.