Masonry Blade - Wet Tile Saw

Masonry Blades are used in cutting concrete blocks. Aand dining areas such as cafeterias and commercial
concrete block is also called cement block orkitchens. Masonry saw blades are used to cut the
foundation block. It is a large rectangular brickblocks to size.
commonly used in construction. For higher density,Glazing such as that used for pottery can also be
sand and fine gravel is mixed with cast concrete, i.e.applied to concrete blocks, resulting in a hard, glossy
Portland cement. While lower density blocks arefinish on this construction material. This finish often
made by using cinders instead of sand and finecan be made virtually any color and, with integral
gravel. These low density blocks are called cinderwater repellents, can be made water-resistant.
blocks in the US and in UK breeze blocks or clinkerThis makes glazed masonry an ideal fit for areas in
blocks. In clinker blocks, bottom ash or clinker is used.which special attention must be paid to moisture
Since concrete is a heavy building material; to reduceissues and sanitation codes. This includes car washes,
weight the blocks are built with hollow centers. Thispools, locker rooms, shower stalls and dining areas
also helps to improve insulation.such as cafeterias and commercial kitchens.
A lot of architects use blocks because they can beTo cut these masonry tiles, masonry blades are used.
layered in designs. For a hard, glossy finish theseThese come in various sizes and styles for the
blocks can be coated with glaze used in pottery. Thisvariety of stone used. To increase the life span of
way you can also color the blocks to your choicethe masonry blade , these are used with a wet tile
while making them water resistant.saw . The flow of water not only cools the material
Where moisture issues and sanitation codes matter;down but also allows the masonry blade to cut for
these masonry blocks serve the best. Such placeslonger.
include car washes, pools, locker rooms, shower stalls