How to Protect Foundation Plumbing Pipes?

If you install any underground plumbing pipes, in yourfind yourself within a short time, repairing the pipes
concrete building foundation, you will need to protectthat are either inside of your concrete foundation or
them, from the concrete. You can use a variety ofburied underneath your concrete foundation. Either
products and the most common of them will be away, this isn't going to be a good thing.
Styrofoam wrapping that can be purchased at mostYou definitely need to wrap a plastic sleeve around
plumbing supply stores.the water supply pipes that are going to be buried or
Let's start with the waste pipes, that are made outin direct contact with the concrete. This is a must
of plastic. The concrete could actually start to putand most building departments will require your
pressure on the plastic pipes as the concrete startsplumbing pipes to be wrapped, before it they will sign
to expand and this pressure could actually damageoff on your rough foundation plumbing inspection.
your new waste pipes.However, for the waste pipes, you can actually use
You don't need to wrap all of the plastic waste pipes,cardboard to protect them. If you're short on funds,
only the parts of the waste pipes that will bewhy not grab some cardboard boxes, dismantle them
exposed or in direct contact any concrete, but youand start using cardboard to wrap the pipes, with a
do need to protect every copper water supply linelittle duct tape.
that will be buried under the ground or exposed toThere are plenty of ways to save money in the
the concrete, with a plastic sleeve. These productsconstruction business, buy a few books, read a
can be purchased again at most building supply orcouple of articles, with a lot of pictures in this can
plumbing supply stores.provide you with lots of construction information,
If these pipes aren't protected properly, you couldfrom experience building contractors.