How to do a masonry retaining masonry wall

Retaining walls are made to retain soil beyond theThe retaining wall should be erected like a normal load
angle of repose. This can be made of bricks, blocks,bearing wall. Excavate the foundation from from the
stones and even concrete. It is important to noteedge of sloped soil at the bottom. Add foundation
that, the amount of soil to be held back and theconcrete and extend the footing with a toe on the
height determines type to use. On slopping sites, thesoil side. Use normal foundation stonework and backfill
parking or building could be below the natural groundto the level of foundation wall. Add weep holes at
thus requiring soil to be held back. During thethis level and short PVC pipes extending a quarter
construction of this walls, weep holes are provided tofoot into the soil. Erect the stone wall or with this
drain off excess water from retained soil.holes staggered the entire wall surface.
The retaining wall construction involves landscapingAs the retaining wall is coming up, backfill slowly
works. The landscaper should determine the level ofwithout loading the wall completely. If this is on a
holding back the soil. This can also be done as stepsdriveway, put the drain along it to avoid eroding the
down a lawn, rectangular flower boxes or just plainfoundation. Build the wall to the maximum height of
wall structures. When the choice is made, ensure thefour feet. After the wall is completed, rod all the
wall is erected in dry weather. This because retainingweep holes to ensure they are clear off debris. After
water before it achieves strength will weaken it. Fora week use a watering hose, while adding soil to let it
flower boxes make heights to be maximum of onecompact naturally. The wall can be plastered or key
foot racking back towards sloping site.pointed for good aesthetics.