Concrete Common Brick Machine In Winter Attention

As the winter low temperature is not conducive tobased on the proportion of production formula, the
concrete common brick machine(also known asresult is can not make brick, brick molding can not,
Burning-free brick) production and conservation,take the broken one. Can make a good little brick,
products susceptible to freezing damage, affectbut still below standards of quality bricks. The reason
product quality. Therefore, the winter production offor such a situation. There are several reasons:
concrete common brick should pay particularUsers to buy the equipment itself is poor quality
attention to the following aspects:products, not to normal production capacity of
A winter production measures should be reasonable,unburned brick. A device is a rotary brick, for the
on the job and technical personnel to conduct trainingproduction of standard bricks, the previously
and technical posts in winter. At the same time makementioned standard brick must be used to produce
non-slip, frost work to ensure safe production.such a rotary brick, but still depends on what the
Second, concrete brick material used to preventequipment manufacturers Caixing. Turntable in the
freezing. Sand, gravel, fly ash mixed with othermarket there are not as good as the brick block
materials should be used with, not to accumulate toobrick machine, brick machine, the quality of low
much. Mix with warm water should be poured, topressure equipment, pressure not reach the stated
prevent snow and ice, frozen block into the mixer,requirements. The materials used are simply not up
the impact of the quality of bricks.to wear and will not play a role.
Third, the temperature is too low will directly affectAnother device is the block machine, block in the
the quality of concrete bricks, mixing added whenmarket of small and medium machine not only can
mixed with the appropriate agent (antifreeze), do notnot make standard bricks to even Hollow bricks are
have the conditions to stop production.to draw up, not to mention the quality.
Last, finished moisturizing materials brick must beIf the user does not buy quality equipment, quality
covered, the temperature is below 0. C, rawbrick will appear, then that proportion of raw
materials and finished products for thermal cover,materials used have a problem, Zhegewomen on
curing time of not less than 45 days, strength testingagain tomorrow to continue to analyse.
must be done before use. Storage of materials withinIf your brick tiles quality problems arise because the
the scene and put the finished products toequipment is purchased, then we recommend that
specification. Soaked with water frozen in the brickyou quickly advanced high-quality Burning-free block
can not be used.machine replacement, to ensure that your brick will
Some brick will be surprised that she obviously isone day return to normal production.